Wishtroop Automation

The KFD2-CR4-1.2O is suited for the connection of 2- and 3-wire transmitters. It may also be employed as a repeater for 0 mA ... 20 mA signals (current source). Both outputs provide a 0 mA ... 20 mA current corresponding to the input signal. 2-wire transmitters are connected to terminals 1 and 3. The input for the signal current is terminal 3. The minimum available voltage is 16 V at 20 mA. Current sources are connected to terminals 2 and 3. The source is not supplied with energy via terminal 1+ which is not used. The input, output and power supply are galvanically isolated from each other.
Features: 
• 1-channel signal conditioner
• 24 V DC supply (Power Rail)
• Input 2-wire and 3-wire transmitters and 2-wire current sources
• Signal splitter (1 input and 2 outputs)
• Dual output 0/4 mA ... 20 mA
• Accuracy 0.1 %
• Up to SIL3 acc. to IEC 61508

Pepperl Fuchs KCD2-STC-1.20 signal conditioner provides the galvanic isolation between field circuits and control circuits.
The device supplies 2-wire transmitters, and can also be used with current sources.
The device transfers the analog input signal to the control side as two isolated output signals. Bi-directional communication is supported for SMART transmitters that use current modulation to transmit data and voltage modulation to receive data.
The output is selected as a current source, current sink, or voltage source via switches. Test sockets for the connection of HART communicators are integrated into the terminals of the device.

Features:

• 1-channel signal conditioner
• 24 V DC supply (Power Rail)
• Input for 2-wire SMART transmitters and current sources
• Signal splitter (1 input and 2 outputs)
• Dual output 0/4 mA ... 20 mA or 0/1 V ... 5 V
• Terminal blocks with test socket
• Up to SIL 2 (SC 3) acc. to IEC/EN 61508